The importance of safety in your motorcycle battery

Your motorcycle's battery is essential for its operation, and therefore requires significant attention. The appropriate size of the battery for your motorcycle, the position in which they must be located for them to work correctly or compatibility, are some of the determining factors in its acquisition. Many motorcycle users forget about battery safety.
Prevention measures for your motorcycle batteries
Periodic mechanical or electrical checks are the key to having a motorcycle that works optimally when required. Generally, electrolyte levels drop after around six months of use, which deteriorates the battery. If we add to this motorcycles without periodic starts, high temperatures and the absence of energy recharges, the battery may not work when it is needed.
In batteries with filler caps, it is essential to level the charges with distilled water, although there are maintenance-free batteries that cannot be subject to this type of maintenance. Likewise, the terminals and connectors must be in excellent hygienic conditions. If spare parts are produced, safety will be conditioned by the equality of the model, the leveling of sulfuric acid and distilled water.
Safety when maneuvering with motorcycle batteries
Sulfuric acid, gases and other chemical components in batteries are very dangerous for human contact. Some tips to avoid inconveniences:
1. Always remove the red sealed plug on the vent elbow to prevent gas buildup that could cause an explosion.
2. Check the acid marking signs clearly and carry out the manipulation in illuminated areas that facilitate personal care.
3. Where applicable, as is the case with conventional batteries, loosen the vent plugs during charging and ventilate the area. The increasing hydrogen and oxygen inside it could cause a fire.
4. Avoid smoking people, sparks from other sources or any type of naked flames in the vicinity. Do not forget that hydrogen gas is highly flammable and could cause plate breakage or explosions.
5. Always connect the cables correctly and avoid friction between the negative cables and other materials of the motorcycle so that electrical short circuits are not generated.
6. Handle batteries with recommended safety accessories such as glasses, gloves and other clothing to protect against burns.
7. If acid spills, clean immediately with water and baking soda.
8. In case of contact with sulfuric acid, wash with plenty of water, clean the area immediately.
9. When acid has been ingested due to an accident, you must go to the emergency service immediately.
Battery safety determines safety with your motorcycle as a whole. Don't forget to take these tips into account.